New Posts New Posts RSS Feed - P3-24
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Welcome to the Graham Slee Audio Products Owners Forum

 

Open to all owners plus those contemplating the purchase of a Graham Slee HiFi System Components audio product and wishing to use this forum's loaner program: join here (Rules on posting can be found here)

This website along with trade marks Graham Slee and HiFi System Components are owned by Cadman Enterprises Ltd

P3-24
 Post Reply Post Reply
Author
  Topic Search Topic Search  Topic Options Topic Options
Fatmangolf View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 23 Dec 2009
Location: Middlesbrough
Status: Offline
Points: 9695 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Fatmangolf Quote  Post ReplyReply Direct Link To This Post Topic: P3-24
    Posted: 31 Mar 2013 at 9:55pm
Soon after I bought my P3-24 in 2009 I switched to a 2 point attachment between headshell and cartridge, using a Baerwald alignment based on the IEC inner and outer grooves (about 60mm and 146mm). It has got a Rega Exact cartridge and various mods already so I was curious about the combination of 3 point and Baerwald.
 
With the Rega 3-point attachment the effective length (arm pivot to stylus) is about 237mm. I measured it as 236.5mm. On the standard mounting distance (pivot to platter spindle) of 222mm, the overhang of 15mm barely makes the Stevenson alignment so I knew I would have to reduce P2S.
 
I have tried 2 options for P2S:
  • 219mm which allows for the IEC Baerwald alignment using an arc protractor
  • 213.5mm which allowed me to use a Baerwald protractor based on 75mm inner groove (like that on the Clearaudio tool)
 
In both cases I was able to use the three screws supplied by Rega, which made the sound a bit tighter and punchier. The second option required a slightly larger offset angle but it sounded better on the records I played.
 
The P3-24/Exact gives a quite different sound to my SL1210/II and Musicmaker cartridge. Less detailed but punchier. A nice change which works well on pop and rock.
 
Jon

Open mind and ears whilst owning GSP Genera, Accession M, Accession MC, Elevator EXP, Solo ULDE, Proprius amps, Cusat50 cables, Lautus digital cable, Spatia cables and links, and a Majestic DAC.
Back to Top
mitch65 View Drop Down
Senior Member
Senior Member
Avatar

Joined: 02 Feb 2013
Location: East Sussex
Status: Offline
Points: 553 		Post Options Post Options   Thanks (0) Thanks(0)   Quote mitch65 Quote  Post ReplyReply Direct Link To This Post Posted: 31 Mar 2013 at 10:25pm
Music Maker III....one of my dream cartridges, maybe one daySmileSmile
Greg

Rega Planer 3
Gram Amp 2
Audiolab 8000A
Auralic Aries Mini
Russell K 50
Back to Top
Fatmangolf View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 23 Dec 2009
Location: Middlesbrough
Status: Offline
Points: 9695 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Fatmangolf Quote  Post ReplyReply Direct Link To This Post Posted: 31 Mar 2013 at 10:32pm
The MM3 is a wonderful cartridge.
Jon

Open mind and ears whilst owning GSP Genera, Accession M, Accession MC, Elevator EXP, Solo ULDE, Proprius amps, Cusat50 cables, Lautus digital cable, Spatia cables and links, and a Majestic DAC.
Back to Top
mitch65 View Drop Down
Senior Member
Senior Member
Avatar

Joined: 02 Feb 2013
Location: East Sussex
Status: Offline
Points: 553 		Post Options Post Options   Thanks (0) Thanks(0)   Quote mitch65 Quote  Post ReplyReply Direct Link To This Post Posted: 31 Mar 2013 at 11:49pm
Originally posted by Fatmangolf Fatmangolf wrote:

The MM3 is a wonderful cartridge.

I'll just keep on droolingCry
Greg

Rega Planer 3
Gram Amp 2
Audiolab 8000A
Auralic Aries Mini
Russell K 50
Back to Top
tg [RIP] View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 19 Jan 2008
Location: Sydney
Status: Offline
Points: 1866 		Post Options Post Options   Thanks (0) Thanks(0)   Quote tg [RIP] Quote  Post ReplyReply Direct Link To This Post Posted: 01 Apr 2013 at 5:14am

Interesting reading Jon,

I assume you have the 3 point mount type arm rather than the older through spindle type which makes it rather more difficult to change the spindle to pivot distance.

Do you use the TTPSU with this deck ? -  my impression of adding that, was that it made quite a change in the overall presentation.
Back to Top
Fatmangolf View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 23 Dec 2009
Location: Middlesbrough
Status: Offline
Points: 9695 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Fatmangolf Quote  Post ReplyReply Direct Link To This Post Posted: 01 Apr 2013 at 1:48pm

Originally posted by tg tg wrote:

Interesting reading Jon,

I assume you have the 3 point mount type arm rather than the older through spindle type which makes it rather more difficult to change the spindle to pivot distance.

Do you use the TTPSU with this deck ? -  my impression of adding that, was that it made quite a change in the overall presentation.


Thanks Tony. It is an RB301 arm which has the three screw base and you are right about the old Rega fitting, where I would have drilled a new hole in the next corner round the plinth.
 
Even so the three sets of screw holes involved a little work. I had to rotate the base for the 219mm option so the holes did not interfere with the original 222mm ones. The 213mm screw holes were far enough apart to have the base parallel to its old position.
 
Extending the original 23mm hole towards the platter spindle has resulted in a cutout similar to the SME ones. Obviously I can't move the cartridge along the headshell as the front screw fixes the effective length, so the adjustment is the mounting distance i.e. moving the arm pivot towards (or away) from the spindle.
 
You are right the TT PSU makes a difference. I bought mine a couple of months after the P3-24. I think it firmed up the sound and improved the pitching.
 
My P3-24 has been modified in stages with a Rega white belt, an after market sub-platter and a heavy acrylic platter which the records sit on without a mat. And I have rewired the arm, earthed the spindle and the motor casing. I have replaced the thrust bearing on the motor. The latter reduced the hum on inner tracks to very low levels when I had the MM3 mounted on the RB301 arm.
 


Edited by Fatmangolf - 02 Apr 2013 at 10:01pm
Jon

Open mind and ears whilst owning GSP Genera, Accession M, Accession MC, Elevator EXP, Solo ULDE, Proprius amps, Cusat50 cables, Lautus digital cable, Spatia cables and links, and a Majestic DAC.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.01
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.061 seconds.