Impartiality

This is one reason that I've been doing my headphone comparisons over many weeks; to try and discern the reality from my perception of the reality. These two things are not always the same and sometimes a person's mind can get in the way of the real truth. Going back every so often and repeating the comparisons under different circumstances, at different times, with a different mindset is the only way I feel confidently able to trust my perception of reality. It's like performing a scientific experiment where there are random errors that cannot be prevented. The real truth can be ascertained through consistent repeatability.


Edited by Ash - 15 Jan 2014 at 9:57pm

Graham has a blog explaining cable burn in Ash..unless I've totally missed your point.

Have you tried these yourself in an appropriate application Ash ?

If it might be worth anything, I have used their (previously DIY) buffer using these modules and found it the only device I could insert in the signal chain with no audible detriment.

Sufficiently so, that when I wanted to be able to vary the output of my Reflex for recording purposes, I modified the buffer with a stepped attenuator and used that to control recording levels at the input to my ADC.

This does not mean that I endorse their advertising, but the product is NOT, IMO, rubbish.

Edited by tg - 02 Sep 2014 at 4:03pm