Topic Options
Copyright © 1998
Cadman Enterprises Ltd
Welcome to the Graham Slee Audio Products Owners Forum  Open to all owners plus those contemplating the purchase of a Graham Slee HiFi System Components audio product and wishing to use this forum's loaner program: join here (Rules on posting can be found here) This website along with trade marks Graham Slee and HiFi System Components are owned by Cadman Enterprises Ltd |
Choosing a UPS |
Post Reply 
|
| Author | |
peterb 
Senior Member 
Joined: 02 Feb 2017 Location: Cornwall Status: Offline Points: 354 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Choosing a UPSPosted: 03 May 2024 at 11:38am |
|
Does anyone have any experience of their HiFi supplied by a UPS?
Our mains supply fails a couple of times a year, wind and overhead cable problems mostly, and it causes havoc with my HiFi. I think if it was just a clean break it would be OK but too often it is rapid on/offs before it goes off completely. The Preamp load is not great even when on so the UPS does not need to be a large expensive one, and I am not trying to protect the Power Amp when it is on. Thanks
|
|
|
Peter
--------------------------------------- Dual 505-1, Cyrus CD T, DIY 80W MosFet amp and PreAmp, 2xKEF 103.2 |
|
 |
|
|
CageyH
Senior Member
Joined: 30 Apr 2012 Location: Toulouse, Franc Status: Offline Points: 1751 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 May 2024 at 5:38pm |
|
I started to look at one, and was after a pure sine wave version, and that really bumps the price up, so I did not go any further.
|
|
|
Kevin
European loan coordinator, based near Toulouse, France. Funkified SL1200 Mk.II, BB3, Firebottle Kin , ADI-2 DAC FS, Modulus 686, PD-S703, Solo UL, Triangle Antal EZ |
|
|
|
|
peterb
Senior Member
Joined: 02 Feb 2017 Location: Cornwall Status: Offline Points: 354 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 May 2024 at 10:33am |
|
I know a little about their design; a battery, some Mains detection circuitry, DC to AC conversion electronics and a power output stage.
If the Mains detection system just let the UPS supply when it sensed a Mains issue and otherwise let the load be Mains fed until then, that would work for me. But I think they become to only source of power for the load.
|
|
|
Peter
--------------------------------------- Dual 505-1, Cyrus CD T, DIY 80W MosFet amp and PreAmp, 2xKEF 103.2 |
|
|
|
|
CageyH
Senior Member
Joined: 30 Apr 2012 Location: Toulouse, Franc Status: Offline Points: 1751 |
Post Options
Thanks(1)
Quote Reply
Posted: 05 May 2024 at 10:42am |
|
The other issue is getting a model that allows sufficient peak power for your power amplifier.
Back to the sine wave - https://blog.tripplite.com/pure-sine-wave-vs-modified-sine-wave-explained It depends how sensitive your equipment is as to which would be best. Something like a 1500VA should be ok.
|
|
|
Kevin
European loan coordinator, based near Toulouse, France. Funkified SL1200 Mk.II, BB3, Firebottle Kin , ADI-2 DAC FS, Modulus 686, PD-S703, Solo UL, Triangle Antal EZ |
|
|
|
|
peterb
Senior Member
Joined: 02 Feb 2017 Location: Cornwall Status: Offline Points: 354 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 May 2024 at 6:45pm |
|
OK I have taken the plunge with this one.
I am not expecting to keep the Pre and Amp running, I just want to protect the Pre from spikes so a low power requirement, in standby. My choice is a model which only supplies the load when the Mains is outside the trigger parameters so is not supplying in 'normal' conditions. If it ruins the sound I will use it to protect my NAS.
 |
|
|
Peter
--------------------------------------- Dual 505-1, Cyrus CD T, DIY 80W MosFet amp and PreAmp, 2xKEF 103.2 |
|
|
|
|
CageyH
Senior Member
Joined: 30 Apr 2012 Location: Toulouse, Franc Status: Offline Points: 1751 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 May 2024 at 6:49pm |
|
That should give you plenty of time to power the system down in the event of a.power cut.
|
|
|
Kevin
European loan coordinator, based near Toulouse, France. Funkified SL1200 Mk.II, BB3, Firebottle Kin , ADI-2 DAC FS, Modulus 686, PD-S703, Solo UL, Triangle Antal EZ |
|
|
|
|
peterb
Senior Member
Joined: 02 Feb 2017 Location: Cornwall Status: Offline Points: 354 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Aug 2024 at 11:54am |
|
A quick update. To my ears the UPS is not audible when I am using my setup, which is as it should be as it is not part of the supply.
I have had the Mains circuit trip since it was put in when I was trying to wire a replacement cellar light where the previous owner had used the socket circuit and blacks as live ! The UPS did its job and stopped the corruption of my PreAmp firmware, so as far as I am concerned a worthwhile investment.
|
|
|
Peter
--------------------------------------- Dual 505-1, Cyrus CD T, DIY 80W MosFet amp and PreAmp, 2xKEF 103.2 |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Forum Software by Web Wiz Forums® version 12.01
Copyright ©2001-2018 Web Wiz Ltd.
This page was generated in 0.086 seconds.
Copyright ©2001-2018 Web Wiz Ltd.
This page was generated in 0.086 seconds.