Displayed Prices inc. 20% VAT - UK only
VAT removed on exports
Your country may charge you taxes on delivery
...read more
Price: £165
Length: 1m
Built To Order
Usually ships within 2 weeks
For hi-fi enthusiasts who prefer a little more "accent" to their music whilst it not sounding over the top.
Subjectively, the higher conductivity of silver has the tendency to intensify the "pronunciation" of mid to high frequency sounds.
In our opinion the AgSat90 interconnect cable adds just the right amount of silver for a satisfying sound.
Available in 1m length only and now in dual mono for stereo (2 separate cables).
Terminations in RCA/phono plugs both ends.
For more information continue reading after the purchasing options below.
Displayed Prices inc. 20% VAT - UK only
VAT removed on exports
Your country may charge you taxes on delivery
...read more
Price: £165
Length: 1m
Built To Order
Usually ships within 2 weeks
NB. The pattern in the braided jacket may vary between batches.
A 0.71mm soft fine silver wire of 99.99% purity is added in parallel with the 1mm annealed copper signal conductor to give emphasis over a well-balanced sound.
Meticulously assembled by hand, the AgSat90's silver wire is loosley injected into an insulation channel adjacent the main copper signal conductor to which it is connected at either end.
Whereas 100% silver wired interconnect cables are subjectively hard and overly bright sounding, the careful balance between the conductivities of silver and copper metals makes the tonal balance much more palatable.
The addition of silver to an otherwise highly conductive copper cable subjectively adds a particular accent to the sounds of metalic and strung instruments, producing more of a shimmer to cymbals and highlighting the sound of strings.
Consider that the most common interconnection cables are copper made, and the finished sound of a recording will be balanced to sound just right using such. Then playback using a more conductive metal will sound subjectively different - and silver is the most conductive of all metals.
Is it high fidelity though? Anything that alters the sound from what is intended is obviously not, but where system synergy isn't delivering the snap and sharpness it ought to be doing, the AgSat90 might be just the solution needed.
Otherwise, the AgSat90 has all the excellent shielding and sonic features of our other high quality interconnects.
To find out about those properties read what's on the CuSat50 page.
Swipe down for Specifications and Reviews.
The International Loaner Program is just one of the brilliant things you get to take part in by becoming a member of the Graham Slee forum.
Item | Measurement |
---|---|
Coax stock cable diameter | 6.5mm |
Single cable sheathed diameter | 10mm |
Inner conductor | 1mm diameter solid soft annealed copper; DC resistance: 0.026 Ohms per metre |
Silver conductor | 0.71mm soft fine silver wire of 99.99% purity |
Shield | Annealed copper braid over 100% copper foil wrap; DC resistance: 0.015 Ohms per metre |
Jacket | PVC |
Dielectric | 5 cell semi air-spaced |
Dielectric constant | 1.49 |
Velocity ratio | 0.82 (82%) |
Capacitance | 90pf per metre |
Characteristic impedance | 75 Ohms |
Shielding efficiency | Better than 65dB |
Lay-up "dual-mono" | Seperated stereo pair overall flexible PVC braided with welded ends |
Direction | Marked as "run of the mill" |
Min safe bend diameter | 150mm (6 in) |
Phono terminations | Locking phono (RCA) plugs with gold plated contacts |
Specifications subject to alteration without notice in keeping with our continuous improvement policy.
There are no reviews of the AgSat90 Interconnect cable as of yet