Copyright © 1998
Cadman Enterprises Ltd
Welcome to the Graham Slee Audio Products Owners Forum Open to all owners plus those contemplating the purchase of a Graham Slee HiFi System Components audio product and wishing to use this forum's loaner program: join here (Rules on posting can be found here) This website along with trade marks Graham Slee and HiFi System Components are owned by Cadman Enterprises Ltd |
capacitance loading logic |
Post Reply | Page <12 |
Author | |
Teesside Tom
Senior Member Joined: 27 Aug 2021 Status: Offline Points: 115 |
Post Options
Thanks(0)
|
Thank you all for your comments and suggestions, the tonearm is Audio Note and was bought new with a new TT 3 and PSU 3 power supply, as the IQ3 cartridge was maybe 6 months old it made no sense to me practically and financially to change everything at once, my old turntable had no ps so I was expecting a fair step up anyway. The Audio Note dealer actually talked up the mm cartridge and suggested I may well stay with it as I had mentioned I would probably be going to an mc cartridge at some point.
Before receiving the Accession M I drew up a list of albums and tracks to play and one of the first was U2's Joshua Tree, I had set the capacitance to 100pF, and it was soon obvious the Accession was an appreciable step up from my on board phono stage, likewise Bonnie Raitt's album Nick of Time. Trying to listen objectively is not easy especially when playing "favourite" albums and also I find that when listening to the Accession on certain tracks as I did last night you have to decide if the "more" you are hearing is the Accession exposing an issue on the recording or if you like is it the gap I have in the matching of the capacitance. System warmed up, all capacitance switches up / zero, I put on The Simon and Garfunkel Collection, an original in top nick, most tracks sound ok but knowing what I know now I'm thinking could it be better. On B O T Water there is a point where Art G is starting to reach to get the higher notes and the violins come in and there is a high crescendo finish which sounds somewhat strained - (S&G liked to multi track layer - yes) recording or capacitance mis match? I think my route could well be Accession C with Enigma and an mc cartridge checking first that the mc can be optimally matched with the Accession C. Changing wiring / cables is too horrible to contemplate.
|
|
Graham Slee
Admin Group Retired Joined: 11 Jan 2008 Location: South Yorkshire Status: Offline Points: 16298 |
Post Options
Thanks(1)
|
Here's the electrical plot of peaking due to cap load on the 1042. Ignore the massive qty of dBs, it's only relative, but it illustrates the peak is +2dB at 420pF, +1dB at 320pF, and flat at 200pF. The frequency at the peaks is around 8kHz and will be cymbals and vocal esses (mostly female) - in other words, bright.
The electrical plot cannot illustrate the mechanical tuning (think tuning fork), which helps extend the frequency response to 20kHz - here it's -3dB at 16kHz 200pF loaded. (please excuse the curved vertical)
Edited by Graham Slee - 14 Oct 2021 at 12:33pm |
|
That none should be able to buy or sell without a smartphone and the knowledge in how to use apps
|
|
BackinBlack
Senior Member Joined: 05 Feb 2012 Location: Hinton, N'hants Status: Offline Points: 2020 |
Post Options
Thanks(0)
|
I find it rather disappointing that the dealer, knowing an IQ3 cartridge was to be used, recommended the Arm combination whose cable has in the published specification a total capacitance of 320pF, whilst the same manufacturers specification for their IQ3 cartridge clearly states that the combined capacitance of the arm, interconnect and amplifier should be no more than 200pF.
Albeit somewhat late to this thread, having been led down the "(more expensive) silver is better" path, I have found in my own system with MM, silver arm wiring/interconnect to give a rather bright and harsh sound. I much prefer a good copper litz for Arm wiring, with CuSat interconnect. Ian
|
|
Just listen, if it sounds good to you, enjoy it.
|
|
Teesside Tom
Senior Member Joined: 27 Aug 2021 Status: Offline Points: 115 |
Post Options
Thanks(2)
|
Can I clear something up, it was my choice to go with the Litz silver wiring even though I had read in component reviews for example how the reviewer had changed cables, copper to silver for example and thought it preferable but also noted some might prefer the copper and suggested trying both at home if possible. The problem is with tonearm wiring and arm interconnect cable of course it's not that straight forward. My downfall if you like was being aware of different opinions on copper and silver but knew nothing of capacitance and matching
The dealer is not one for lab test results and such, more a listen and go with your hearing person and it is possible he was not aware of the high capacitance of the wiring, but although I think he should have been I had to go to Audio Note for those figures. At least 12 years ago I bought a Clearer Audio mains cable, I think they are 6 nines copper, silver coated, pleased with it, I now have two of their mains distribution blocks and 4 of their mains cables so I had no thoughts of there bing an issue specifying the Litz wiring although this is silver only. It's a funny old world, my previous turntable was a Nottingham Analogue Spacedeck which I had for many years and I was looking at going to another N A turntable, the Dias with Martin Bastin power supply. I telephoned a long time Nottingham Analogue dealer on the morning I went to the Audio Note dealer and said I was interested in the Dias, to my astonishment he said well we don't do much of that make now, and I pointed out there was a 2/3 month wait as their order books were full. His reply was they were nearly all overseas orders and tried to interest me in other makes and one in particular they had. I think this and the months I had spent looking had taken it's effect and I had virtually decided to place an order when I entered the A N dealers demo room. It'l all get sorted, if your system is sometimes not up to snuff I can recommend Ardbeg single malt, Australian Shiraz or Merlot red from the Barossa region or a white Sauvignon (N Z) from the Marlborough Estate - don't mix the grape with the grain!
|
|
patientot
Senior Member Joined: 28 Nov 2018 Location: USA Status: Offline Points: 1523 |
Post Options
Thanks(0)
|
Part of that is likely due to the recording itself. I'm not the biggest S&G fan but if you listen to their recordings, even later CD versions, you can hear vocal sibilance captured by the microphones, instruments occasionally overloading the mic, etc. This is quite common on a large number of 60s rock and pop recordings if you listen very, very closely. Additional capacitance can exaggerate that somewhat. The only way to know for sure if it bothers you would be to make a digital recording of different settings via the Accession outputs and A/B them. That or you could measure the cartridge frequency response using an accurate test record and software. As Graham said, the actual frequency response will be a little different than the electrically modeled response. Re: the Accession MC, if you look at the specs and info on this site, it will say what cartridge output range is recommended and what loading options are available. Compare that with some cartridge specs. If you want to get some rough ideas of how things sound with the Acc. MC and different MC carts, you can look at Bob Wood's videos: |
|
SL-1200 MK7 (modified) + Reflex M + PSU-1 used with AT150-40ML, AT VM95ML, Stanton 680mkII + Ogura, and Shure M35X cartridges.
|
|
Teesside Tom
Senior Member Joined: 27 Aug 2021 Status: Offline Points: 115 |
Post Options
Thanks(0)
|
Thanks patientot for the very useful comment on mc cartridges not really being affected by capacitance, sorry for the late reply.
|
|
Fatmangolf
Moderator Group Joined: 23 Dec 2009 Location: Middlesbrough Status: Offline Points: 8960 |
Post Options
Thanks(0)
|
The load capacitance must be much larger because the MC self-inductance is lower.
|
|
Jon
Open mind and ears whilst owning GSP Genera, Accession M, Accession MC, Elevator EXP, Solo ULDE, Proprius amps, Cusat50 cables, Lautus digital cable, Spatia cables and links, and a Majestic DAC. |
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |