Copyright © 1998
Cadman Enterprises Ltd
Welcome to the Graham Slee Audio Products Owners Forum Open to all owners plus those contemplating the purchase of a Graham Slee HiFi System Components audio product and wishing to use this forum's loaner program: join here (Rules on posting can be found here) This website along with trade marks Graham Slee and HiFi System Components are owned by Cadman Enterprises Ltd |
Seeking knowledge |
Post Reply | Page 123 4> |
Author | ||
ICL1P
Senior Member Joined: 04 Aug 2012 Location: Faringdon, Oxon Status: Offline Points: 2341 |
Post Options
Thanks(0)
Posted: 21 Jan 2015 at 12:51pm |
|
i currently have an integrated amplifier from a mainstream manufacturer. In the long term I expect I'll replace it with a Majestic and a pair of Proprii.
As some of you will know the amp has been doing its stuff running in a pair of Frugal Horn Mk3s and mostly low volume. Over the last few days when I turn the volume right down on the amp I can still hear it playing in the room next door. What's occurring? |
||
Ifor
===== Reflex M & ACCESSION M, CuSat50, Majestic DAC, a Proprius pair. |
||
Graham Slee
Admin Group Retired Joined: 11 Jan 2008 Location: South Yorkshire Status: Offline Points: 16298 |
Post Options
Thanks(0)
|
|
It's OK Ifor, Mulder and Scully are already on the case... they're inside your Frugal Horns... |
||
That none should be able to buy or sell without a smartphone and the knowledge in how to use apps
|
||
Ash
Senior Member Joined: 18 Mar 2013 Location: Dorset Status: Offline Points: 4334 |
Post Options
Thanks(0)
|
|
Well each speaker cabinet is large (and heavy) so when directly coupled with the hard floor and indirectly coupled with the walls of the listening environment (all have a low frequency of resonance), the vibrations are synergistic (they summate) and depending on the damping properties of the materials, the vibrations would probably be audibly transmitted several metres even if the source is at low amplitude. Amplitude increases substantially close to or at resonance. Is there any way you can decouple the speaker cabinets from the room further???
Edited by Ash - 21 Jan 2015 at 2:26pm |
||
We do not see things as they are. We see things as we are.
|
||
ICL1P
Senior Member Joined: 04 Aug 2012 Location: Faringdon, Oxon Status: Offline Points: 2341 |
Post Options
Thanks(0)
|
|
Ash, what I thought I said was that the amplifier volume control no longer silences the amplifier when turned all the way down.
|
||
Ifor
===== Reflex M & ACCESSION M, CuSat50, Majestic DAC, a Proprius pair. |
||
BackinBlack
Senior Member Joined: 05 Feb 2012 Location: Hinton, N'hants Status: Offline Points: 2020 |
Post Options
Thanks(0)
|
|
Perhaps it really goes from 1 to 11, not 0 to 10?
|
||
Just listen, if it sounds good to you, enjoy it.
|
||
Ash
Senior Member Joined: 18 Mar 2013 Location: Dorset Status: Offline Points: 4334 |
Post Options
Thanks(0)
|
|
That's interesting. What is the source of the signal going into the amplifier? So there's no other gain controls then?
|
||
We do not see things as they are. We see things as we are.
|
||
ICL1P
Senior Member Joined: 04 Aug 2012 Location: Faringdon, Oxon Status: Offline Points: 2341 |
Post Options
Thanks(0)
|
|
I've tried different sources. TT through Reflex, TV and Pi through a DAC.
|
||
Ifor
===== Reflex M & ACCESSION M, CuSat50, Majestic DAC, a Proprius pair. |
||
Post Reply | Page 123 4> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |